Dock Norte S.A. Equipamiento y Servicios de Monitoreo Ambiental

Designed specifically for monitoring gaseous emissions.

The EPM Model 797.433 Out of Stack Sampler with Diluter is designed specifically for monitoring gaseous emission in SCR's, liquid catalytic crackers, utility coal pulverizers, steel mills, lime and cement kilns, incinerators and other high particulate applications.

Product Details

The system consists of an Intertial Filter housed in an insulated stainless steel enclosure to meet NEMA 4X specifications. To prevent sample condensation, both key components (inertial filter and sample diluting section) are further enclosed in a heated aluminum cabinet, which can be maintained at temperatures as high as 250°C (482°F). A special option is available for applications up to 450°C (842°F).

Key Features

• Provides representative particulate free samples fro CEM and other critical monitoring applications
• Integral inertial filter removes particulates as small as 0.5µm
• Available with dilution ratios that range from 12:1 to 350:1
• Permits direct sampling for applications where undiluted samples are required, such as O2
• Heated assembly prevents sample condensation
• Integral accumulator tank for direct blow-back cycles
• Corrosion resistant AISI 316 stainless steel construction in all wetted parts
• Easy to maintain and service, due to complete modularity of all components... readily accessible no moving parts to fails or wear out
• Standard 4" 150# ANSI adaptor flange mounts directly to source. Optional adapters permit mounting to other sizes.


ANALIZADORES DE CHIMENEAS


Diluting Sampler w/ Inertial Filter - Model 797.433
Designed specifically for monitoring gaseous emissions. The EPM Model 797.433 Out of Stack Sampler with Diluter is designed specifically for monitoring gaseous emission in SCR's, liquid catalytic crackers, utility coal pulverizers, steel mills, lime and cement kilns, incinerators and other high particulate applications. Product Details The system consists of an Intertial Filter housed in an insulated stainless steel enclosure to meet NEMA 4X specifications. To prevent sample condensation, both key components (inertial filter and sample diluting section) are further enclosed in a heated aluminum cabinet, which can be maintained at temperatures as high as 250°C (482°F). A special option is available for applications up to 450°C (842°F). Key Features • Provides representative particulate free samples fro CEM and other critical monitoring applications • Integral inertial filter removes particulates as small as 0.5µm • Available with dilution ratios that range from 12:1 to 350:1 • Permits direct sampling for applications where undiluted samples are required, such as O2 • Heated assembly prevents sample condensation • Integral accumulator tank for direct blow-back cycles • Corrosion resistant AISI 316 stainless steel construction in all wetted parts • Easy to maintain and service, due to complete modularity of all components... readily accessible no moving parts to fails or wear out • Standard 4" 150# ANSI adaptor flange mounts directly to source. Optional adapters permit mounting to other sizes.