The most popular instrument to detect traces of ect traces of Methamphetamine

Used by the Drug Enforcement Adminstration Office (DEA), the widely used INNOVA-DEA gas detection instrument detects O2, LEL/PPM, H2S and traces of Methamphetamine. - Detects hydrocarbons in two ranges: 0-1000 PPM and 0-100% LEL.

Product Details

The INNOVA- DEA gas monitor is the most widely used gas monitor for detecting flammable gases and vapors encountered in clandestine drug labs. The INNOVA - DEA monitor is our most sensitive gas monitor, specially designed to pick up trace levels of hydrocarbons in either percent lower explosive limit (LEL) or in parts per million (PPM).




Features

• Designed to detect combustibles in percent LEL or PPM range
• Ammonia, Carbon Monoxide, Hydrogen Sulfide, Oxygen, Phosphine detection also available
• Extra sensitive PPM hydrocarbon range (0-1000 ppm) in 10 ppm increments
• Humidty resistant combustible sensor is not affected by change in relative humidity (RH)
• Calibrated with hexane to represent fuel vapors
• LCD display shows real-time gas concentrations
• Probe, with internal hydrophobic filter, is provided to protect pump and sensors from dust, water, or other contaminants
• Built-in datalogger
• Interchangeable "D" NiCd or alkaline batteries


Standard Gas Ranges

Gas	Formula	Standard Range
Ammonia	NH3	0 - 100 ppm in 1 ppm increments
Carbon monoxide	CO	0 - 300 ppm in 1 ppm increments
Combustibles		0 - 100% LEL in 1% increments
		0 - 1,000 ppm in 10 ppm increments
Hydrogen Sulfide	H2S	0 - 200 ppm in 1 ppm increments
Phosphine	PH3	0 - 1 ppm in 0.01 ppm increments

Notes:

1- All Innova's are shipped with Alkaline Batteries. Whenordering a Ni-Cad version,Order Chargers and Ni-Cad batteries separately.
2- Calibration Kits are required on all instruments, and must be ordered separately.
3- The FV Designator requires that the instrument software be set-up for 0-1,000 pppm combustible range.
4- Portable Monitor Accessories

Specifications

Gas	Ammonia (NH3) - 0 to 100 ppm in 1 ppm increments
	Carbon Monoxide (CO) - 0 to 300 ppm in 1 ppm increments
	Combustibles - 0 to 100% LEL in 1% increments
	Combustibles - 0 to 1,000 PPM in 10 ppm increments
	Hydrogen Sulfide (H2S) - 0 to 200 ppm in 1 ppm increments
	Phosphine (PH3) - 0 to 1 ppm in 0.01 ppm increments
Sensors	Combustibles: Catalytic compensated, humidity resistant
	Electrochemical: NH3, CO, H2S, O2 and PH3
Sampling Method	Sample-Draw, Internal Pump
Approvals	UL Classified and CSA Certified