Vea esta pagina en español

Brochure
Download brochure

The modules are mounted on DIN-rail standardized 35 mm wide metal with hat-shaped cross section.


Characteristics

Relays	• Eight units with single investor contacts: 220VCA/6A, 120VCA/8A. • Indicator LED of active state per Relay. • With open input the relay passes to safe state (inactive).
Inout levels	• TTL, CMOS or 24VCC logical. • Also operates with open collector device. • Activation per high level or low level, independent for each relay and selectable for users by Jumpers (JPn); for high level (1-2), or for low level (2-3).
Applications	• Solenoids, motors, collectors, lamps, etc, controls.
Assamblies and Terminal BLocks	• Terminal Block for every terminal. • In plastic box with and DIN Riel assembly.
Dimensions	• 8,0 cm x 8,5 cm x 4,0 cm.

Protection fuses and LED power.
Ambient temperature range: -10ºC to 40ºC.
When used inside the box is recommendable a vertical assembly to allow a good ventilation. Do not ignore this recommendation in areas with ambient temperatures above 30ºC.