Vea esta pagina en español

Brochure
Download brochure

Keep your equipment updated
Download Update

• Data Acquisition device up to 255 sensors
• Programmable 255 alarms
• Data Concentrator System (TerminalWEB)
• Updatable via USB
• Multi-Language

Product Description

LNX DataLOGGER is a hardware and software combined for acquisition, storing, processing and transmitting data streamed by up to twenty sensors in six/ twelve/eighteen analog input channels (LNX Series) or sixteen analog input channels, including a pulse counter.

LNX series have a plaque allowing the calibration, instruments alarms, and other plaque that allow communication via AIR.

LNX DataLOGGER can be independently used to handle a sensor, analyze multiple sensors, laboratory analytical sensors, industrial processes control system or security work.

DataLOGGER enables a real time visualization of 255 simultaneous sensors. Since DataLOGGER has from 6 acquisition channels, any number of sensors can share the same input analog channel thus elaborating data collected in another time range or with a different elaboration type.

Also, these virtual sensors can be shown on display or remain invisible, but sending elaborated data to the database.

Operative Capacity

The LNX DataLOGGER has 6 analog inputs with programmable gain, and electrical scales from 0 to 0.08125 volts up to 0 to 5 volts, 7 digital inputs or outputs, and one Pulse Counter.

Data elaboration is performed at sensor level, having the possibility to configure a different time interval for each one.

Main Characteristics

Main characteristics are described below within their main groups:

Inputs and Outputs
• Up to 25 programmable analog inputs
• Up to 40 digital inputs/outputs
• Up to 5 Pulse input
• Up to 255 simultaneous sensors

Storage
• Local data storage in SQL Server® engine
• Remote data storage via LAN local area network in central concentrator
• Wireless remote data storage in central concentrator
• User-defined storage interval

Protocols
• MODBUS via TCP
• SERIAL

Calibration
• Simultaneous calibration of up to four sensors.
• Programmed and unattended automatic calibration.
• Calibration advances visualization at different phases of each one of the sensor.
• Reports of the calibration records and results and changes introduced in the drift correction settings.
• Calibration history.
• Charts drawing during calibration.
• Solenoid valves opening and closing control.
• Transmission of calibration records to central concentrator.

Alarms
• 255 configurable alarms.
• Real time alarms.
• Average alarms.
• Relay switching option when alarm fires.
• Software and hardware alarms detection.
• Alarms transmission to central concentrator.
• Alarms history record.

Connectivity
• Historical records transmission to central concentrator.
• Instant values transmission to central concentrator.
• Calibrations records transmission to central concentrator.
• Alarms records transmission to central concentrator.
• Current Campaign and Point transmission to central concentrator.
• DataLOGGER full remote control.

Charts drawing
• Real time charts drawing of every sensor operation at data collection and calibration.

Updating
• Updatable via USB

Internationalization
• Multi-language interface

Applications
• Environmental monitoring
• CEM
• Meteorological stations
• Lab sensor
• Industrial processes
• Labor security and hygiene

Differents Scenarios

Product Specifications
Sensors Management	• Data Management and processing from up to 255 Sensors • Virtual Calculated Sensors via MicroC built-in language • MODBUS PLC Management • Serial RS232 Sensors Management • MultiGas CEMS ready • ThermoFisher i Series connection via TCP • Analog Instruments via Industrial grade 24 bits resolution built-in board • Pulse Counter Instruments via built-in board • Davis Instruments Vantage Pro 2 management via USB • Relays and valves switching via built-in board
Hardware	• Redundant data storage in built-in RAID Mirrored Backup SATA drives of 160 Gb • Up to 25 Analog Inputs of 24 bits resolution • Up to 40 Digital I/O • Up to 5 Pulse Counters • 5 external 12 Volts terminals • 2 RS232 Serial ports • Ready to plug external relays modules (optional) • Ready to plug external wireless communication module (optional) • Ready to plug 56k analog modem (optional) • Ready to plug external rack mount TouchScreen • Industrial rack mount in 1 unit height
Remote Control	3 modes of Remote Control via LNX Connector   • Safe Support Mode   • Read-Only Control Mode   • Full Control Mode
Safe Remote Monitoring	Remote monitoring and data processing via TerminalWEB™
Data Processing and Actions	• Average user defined storage data interval • Flags Data validation • Relay switching (open/close) when average data is lower or higher than value    E.g. Switch relay 1 (open valve) if 15 minutes average of CO is > 6.8 ppm • Send email and/or SMS when average data is lower or higher than value
Alarms Processing and Actions	• Control and receive up to 255 Alarms • Virtual Calculated Alarms via MicroC built-in language    E.g. Fire alarm If CO > 3.6 ppm • Relay switching (open/close) when alarm fired    E.g. Fire alarm If SO2 > 550 ppb and also switch relay 3 (close valve) • Send email and/or SMS when alarm fired
Operating Temperature	• 15º C - 40º C
Power Requirements	• 100 vac, 115 vac, 220-240 vac +/-10% @ 236W
Size and Weight	• 415,45 mm (W) x 43,18 mm (H) x 508 mm (D), 7 kg